Clean Your Outdoor Lights

Note: Outdoor lights come in all different shapes and sizes, so if you have an owner’s manual for your light fixtures, check it first for instructions on the best way to clean your particular fixtures.

Medium_lantern

1
Cut off the power to your lights. If your fixtures are plugged into a wall, unplug them first. If there aren’t plugs, locate your electrical panel to shut off the power supply to your lights.

2
Take the fixture apart. Take apart any pieces that can be disassembled including the light bulb. This will make them easier to clean. To remove the bulb, you’ll likely need a screwdriver for the screws that are holding together any casing. Once it’s loose, remove the bulb and set it aside.

3
Make a dish soap and water cocktail. Mix together a drop of dish soap with warm water, and then dip a microfiber cloth into the solution.

4
Clean the lights. Using the damp cloth, clean the outside and inside of the exterior light. Use an old, soft-bristled toothbrush to reach small crevices.

5
Dust the light bulb. With a dry cloth, carefully dust the light bulb and the socket. It’s important that no water touches the bottom of the bulb or the socket. If it does, dry it completely before proceeding.

6
Reassemble the light. Again, make sure all parts of the outdoor light is completely dry before doing this! Then, repeat these steps for any remaining outdoor lights.

Source

My Website

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s